Epoxy based coating system having highest chemical resistance for protecting the surfaces under severe acidic and alkaline conditions for both interior and exterior applications and also resistant to saline, moisture, water, acids & alkails.
Application Instructions :(Please read general instructions)
Surface Preparation : Surface to be coated must be structurally sound, dry, free from loose material. All surface contamination must be removed. Grease and oil should be grit blasted or water jetted. Deeper penetration must be removed by mechanical means.
Mixing: Contents of Resin and Hardener should be throughly stirred individually to disperse any settlement which may taken place during storage. The entire contents of Hardener should be poured into Resin and the materials thoroughly mixed for atleast 3 minutes taking particular care to scrap the sides and bottom of the container. Mechanical mixing using a slow speed (300-400 rpm) electric drill fitted with mixing paddle is preferable. Follow mix ratio for part mixing.
Application : Apply mixed materials with stiff nylon brush. The 1st coat must be firmly applied and be well scrubbed into the surface. The 1st coating should be allowed to become tack free, before applying the 2nd coat. No thinners or solvents should be added.
This site is designed and hosted by www.unnathi.com, Bangalore.