Typical Properties


Applications:


As a base coat before putty

As a water proof coating
Pack Size:                
                   4    kg,
                   20  kg,

EPOXY  Sealer is a 100% solids impermeable epoxy system designed as primer coat prior to application of epoxies on smooth surface to increase bonding strength and for protection of sand blasted surface from rusting. Recommended for durable water proofing and sealing applications to totally prevent penetration of water.
EPOXY SEALER
Corrosion resistant epoxy coating
Application Instructions :(Please read general instructions)

Surface Preparation : Surface to be coated must be structurally sound, dry, free from loose material. All surface contamination must be removed. Grease and oil should be grit blasted or water jetted. Deeper penetration must be removed by mechanical means.

Mixing:Resin and Hardener components should be mixed thoroughly to disperse any settlement. Add entire contents of Hardener to Resin and mix homogeneously.

Application : Apply mixed materials with suitable stiff type brush. The 1st coat must be firmly applied and be well scrubbed in to the surface. The 1st coating should be allowed to become tack free, before applying the 2nd coat. As for as possible the coating should be applied on bare surface only. Surface temperature should be ambient at the time of application. The more number of coats will give higher degree of insulation. No solvents or thinners should be added. Dry finish will produce textured finish, if the roughness is absent, then Heat Insulate has not been stirred properly.
#3, 1st Cross, Netaji Circle, Mathikere Ext. Bangalore - 560054,     Email: unnathigroups@gmail.cominfo@unnathi.com,   unnathicare@gmail.com    Phone: 080 - 23604570 
Mobile : +91 9986004163,    +91 9845554959
This site is designed and hosted by  www.karnatakawebmart.com, Bangalore.
PH: +91 80 23606148, Email: contact@karnatakawebmart.com
Copyright Unnathi Groups, All Rights Reserved